Surface Inspection
Maddox AI enables the reliable and automated identification of surface defects such as soiling, metallic abrasion, impact marks, scratches, chipping on ceramics and many other defects.
Vacuum interrupters
Automotive
60 - 80k €
Our customer produces over 1,000 switch tubes every day, which are inspected 100% manually by at least one specialist per shift. Due to the intricate defects (flaking, scratches, contamination) that have to be found on a complex component geometry with copper and ceramic surfaces, magnifying glasses and special lighting were used in the manual inspection. Despite these tools, the inspection accuracy varied considerably between employees per shift. With the introduction of Maddox AI, inspection has been fully automated so that defective components are detected accurately and reliably. In particular, components are now inspected consistently across all shifts and according to clearly defined defect criteria.
The quality check is now fully automated, which has significantly reduced the manual effort and considerably increased the efficiency of the checks.
Digitized analyses
Less pseudo scrap
Investment payback period
Thanks to Maddox AI’s device and software, incorrectly assembled components and other damages can be detected and tracked to a specific PCB.
Electronics
Retrofit
By upgrading the existing camera system with Maddox AI’s software, the visual quality control of data cables is enhanced with AI-powered defect detection, making it not only more precise but also more consistent.
Electronics
Maddox AI enables the reliable and automated identification of defects such as sheet metal damage, bubbles in the potting, damaged conductor paths and many more.
Automotive
